Question 1

What is the ideal pH level for an irrigation lake?

Accepted Answer

For irrigation use, lake water pH is best kept in a moderate range of roughly 6.5 to 8.0. Water below pH 6 turns corrosive and damages metal pipes and fittings, while readings above 8.2 encourage algae blooms and calcium carbonate deposits that clog lines and injectors. On the pH scale of 0 to 14, 7 is neutral, and because the scale is logarithmic each whole number represents a tenfold change in acidity or alkalinity.

Question 2

What happens if irrigation water pH is too high?

Accepted Answer

Water that is too alkaline clogs lines, pipes and injectors with calcium carbonate deposits and can lock nutrients up in the soil, stopping plant roots from absorbing iron and micronutrients so young leaves turn yellow, or chlorotic. High pH also favours algae blooms, which flourish between pH 8.2 and 8.7 and push the pH higher still once established. In Florida, natural fresh water can read well above 8.5 depending on local conditions.

Question 3

What happens if irrigation water pH is too low?

Accepted Answer

Water with a pH below 6 becomes corrosive and damages the metal pipes and fittings within an irrigation system. Low pH also makes toxic elements carried in as runoff more mobile in the water, so they are more easily absorbed by plant and aquatic life. Most aquatic organisms only thrive between pH 6.5 and 9.0, so readings below that range harm the lake's ability to sustain itself.

Question 4

How do you test the pH of an irrigation lake?

Accepted Answer

A simple test kit can flag a sudden shift, but the size of a typical irrigation lake means it only gives a basic indication. The most reliable method is to send regular water samples to a specialised laboratory such as the UF/IFAS Extension Soil Testing Laboratory in Gainesville, which can measure pH from a single pint of water. A lab can also report water hardness, salt contamination and suspended solids, all of which are valuable when managing a complex irrigation system.

Question 5

What causes pH levels to change in an irrigation lake?

Accepted Answer

Because an irrigation lake is a closed water source, its pH shifts with contamination from rain and surface run-off, which can carry urban stormwater and agricultural substances into the water. Natural factors such as increased plant growth, algae blooms and unusually heavy rainfall also move pH up or down. This is why pH should be monitored regularly rather than checked only when a problem appears.

Question 6

Why does pH matter for irrigation and landscape health?

Accepted Answer

pH is one of the fundamental measures of an irrigation lake's health, indicating the balance of acid and alkali in the water. Water that is too acidic or too alkaline harms the organisms that keep the lake self-sustaining and damages the turf and vegetation it irrigates. Getting pH right, and keeping it right, is a major step toward a healthier landscape and a reliable irrigation system.

The Hoover Irrigation Systems Blog

Featured Blog Article

Landscape Health Depends on a Total Irrigation Solution

Irrigation In The Florida Climate

Your Irrigation Solution Can Deliver 24/7 All Year Round

Are You Getting The Best From Your Irrigation System?

Irrigation System Energy Costs: How to Calculate & Reduce Them

The Proper Way To Irrigate

Your Irrigation Solution Success Depends on Teamwork

Smart Irrigation for Today and Tomorrow

Are Irrigation Systems A Modern World Miracle?

Florida's Water And The Health of Your Landscape

10 Landscape Irrigation Tips For The Florida Climate

Leak Detection and Smart Irrigation - Making Your Job Easier!

What Are The Signs Of Overwatering Grass And Can You Fix It?